| Customization: | Available |
|---|---|
| Network Scanning: | Wired |
| Type: | Fixed Mount Barcode Scanner |
|
Still deciding? Get samples of US$ 800/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| XTIOT XTC8161 Fixed Mount Barcode Scanner Specification | |||||||||||
|
Performance Parameters
|
|||||||||||
|
Resolution
|
1408 x 1024
|
||||||||||
|
Sensor Type
|
CMOS, global shutter
|
||||||||||
|
Lens Mount
|
XTC8161 lens focal length is optional: 6mm/12.4mm/14.8mm
|
||||||||||
|
Vision Tool
|
Count: Pattern count, spot count, edge count
Defect detection: Exception detection
Existence: Pattern existence, spot existence, edge existence, circle existence, line existence
Location: Match location, match calibration, fixture
Logic tool: If module, condition judge, logic judge, combination judge, character comparison, calculator
Measurement: L2L angle, diameter measurement, brightness average value, contrast measurement, width
measurement, P2L measurement, greyscale size, line angle, edge width measurement
Recognition: OCR, code recognitio
|
||||||||||
|
Solution Capacity
|
Supports solution importing and exporting, up to 32solutions and 40 modules can be stored
|
||||||||||
|
Lens Mount
|
M12-mount, mechanical autofocus lens
|
||||||||||
|
Max. Frame Rate
|
60fps
|
||||||||||
|
Pixel Size
|
3.45μm * 3.45μm
|
||||||||||
|
Sensor Size
|
1/2.9"
|
||||||||||
|
Dynamic Range
|
71.4dB
|
||||||||||
|
SNR
|
41dB
|
||||||||||
|
Exposure Time
|
16μs~1 sec
|
||||||||||
|
Gain
|
0dB ~ 15 dB
|
||||||||||
|
Pixel Format
|
Mono 8
|
||||||||||
|
Mono/Color
|
Mono
|
||||||||||
|
Lens Cap
|
Transparent lens cap. Polarization or infrared filter lens cap is optional.
|
||||||||||
|
Light Source
|
White lightby default. Red/blue/near-infrared is optional
|
||||||||||
|
Indicator
|
Power indicator (PWR), network indicator (LNK), status indicator(STS), result indicator (OK/NG)
|
||||||||||
|
Communication Parameters
|
|||||||||||
|
Communication Protocol
|
RS-232,TCP,UDP,FTP,PROFINET,Modbus,EtherNet/IP
|
||||||||||
|
Data Interface
|
Fast Ethernet(100Mbit/s)
|
||||||||||
|
Digital I/O
|
17-pin M12 connector providespower Ethernet Digital I/O Andserial port: Input signal * 2(Line0/1) Outputsignal*3(Line5/6/7) Bi-directionalI/O*3(Line2/3/4) Andexternal button input * 1 Output signal can be set as NPN or PNP |
||||||||||
|
Environmental Parameters
|
|||||||||||
|
Power Supply
|
24VDC
|
||||||||||
|
Max. Power
Consumption
|
48 W@24 VDC
|
||||||||||
|
Working
Temperature
|
0 °C to 50 °C (32 °F to 122 °F)
|
||||||||||
|
Storage Temperature
|
-30 °C to 70 °C (-22 °F to 158 °F)
|
||||||||||
|
Humidity
|
20% to 95% RH, non-condensing
|
||||||||||
|
Ingress Protection
|
IP67(under proper installation of lens and wiring)
|
||||||||||
|
Physical Parameter
|
|||||||||||
|
Appearance
|
Size 65.2(mm) * 65.2(mm) * 47(mm)
|
||||||||||
|
Weight Approx. 280 g (0.6 lb.)
|
|||||||||||
|
Packing List
|
XTC8161*1, Power adapter *1, 17pin cable 3m
|
||||||||||
Q1: What' the communication port?
A1: Default is USB, RS232 and TTL is for optional.
Under USB port, there are USB-keyboard, and USB-virtual serial port.
Q2: What kind of barcode can the scanner read?
A2: 1D and 2D barcode.
1D barcode including EAN-8, EAN-13, Code 128, UPC-A, UPC-E, Code 39, Code 93, Matrix 2 of 5, Standard 2 of 5, Industrial 2 of 5, Codabar, MSI Plessey, Plessey, GS1 DataBar, ISBN, ISSN, ISBT 128, etc.
2D barcode including QR code, PDF417, Micro QR code, Datamatrix, etc.
Q3: What's the size?
A3: We can send the 2D drawing and 3D file of the scanner, which contain all dimensions of the scanner.
Q4: What's the baud rate?
A4: Default baud rate is 9600. You can set the baud rate by using user manual, baud rate from 9600 ~ 115200 (Max).
Q5: Can I add prefix and suffix?
A5: Yes, support adding 10 characters prefix/suffix.
Q6: Can I use the scanner at outdoor?
A6: It can work under sunlight, but it's not waterproof, to use the scanner at outdoor, you will need to add a cover for the scanner to protect it in rainy days.
Q7: Can the scanner work in high temperature environment?
A7: The working temperature is -20ºC ~ 60ºC.
Q8: Is there LED lights?
A8: Yes, there are 4 LED lights.
Q9: Can you customize the cable?
A9: We provide custom service for cable length, cable PIN assignments, etc.
Q10: Do you have product certificates?
A10: Product has CE, ROHS, FCC certificates.
){kind=link}